WEBVTT

1
00:00:00.270 --> 00:00:05.520
the canterbury with the pathfinder school and

2
00:00:05.520 --> 00:00:06.930
what we're going to talk about day

3
00:00:07.320 --> 00:00:09.450
is a simple jam not the jam

4
00:00:09.450 --> 00:00:11.490
not is very good to use for

5
00:00:11.700 --> 00:00:14.430
tightened down a bedroll strapping download or

6
00:00:14.440 --> 00:00:15.840
anything that you might need to attach

7
00:00:15.846 --> 00:00:18.390
to your pack or compress that be

8
00:00:18.390 --> 00:00:19.710
able to get and uneasily when you

9
00:00:19.710 --> 00:00:20.160
need to

10
00:00:20.970 --> 00:00:22.110
so i have a simple piece of

11
00:00:22.110 --> 00:00:24.240
parachute cord and it has a knot

12
00:00:24.240 --> 00:00:26.070
tied in one end and another not

13
00:00:26.070 --> 00:00:27.450
tied in the other end with a

14
00:00:27.450 --> 00:00:29.370
bit of a tail what i'm going

15
00:00:29.370 --> 00:00:31.500
to do is i'm going to tie

16
00:00:31.500 --> 00:00:35.430
another overhand knot in the line just

17
00:00:35.430 --> 00:00:36.570
like this but i'm not going to

18
00:00:36.570 --> 00:00:39.540
tighten that knot i'm going to come

19
00:00:39.540 --> 00:00:40.320
around the

20
00:00:40.320 --> 00:00:42.060
the load that i want to tie

21
00:00:42.060 --> 00:00:44.280
up and put my line through that

22
00:00:44.280 --> 00:00:44.700
knot

23
00:00:45.990 --> 00:00:47.730
as i tied not not down what

24
00:00:47.730 --> 00:00:50.250
will happen is this not will become

25
00:00:50.250 --> 00:00:52.500
a stop not in a noose and

26
00:00:52.500 --> 00:00:54.150
i can bear down on that with

27
00:00:54.150 --> 00:00:54.600
tension

28
00:00:56.160 --> 00:00:56.940
and it will hold

29
00:00:58.320 --> 00:00:59.786
so it's going to hold that to

30
00:00:59.786 --> 00:01:02.490
that exact tightness when i wanted undone

31
00:01:02.490 --> 00:01:03.510
all i have to do is grab

32
00:01:03.510 --> 00:01:06.210
this tail and pull away and it

33
00:01:06.212 --> 00:01:07.860
slides on done if i need to

34
00:01:07.860 --> 00:01:09.780
tighten it back up or just my

35
00:01:09.780 --> 00:01:13.140
load because i've taken something out i

36
00:01:13.140 --> 00:01:14.252
can go right back to the type

37
00:01:14.252 --> 00:01:15.030
and position again

38
00:01:16.140 --> 00:01:17.790
that's called the jam not it's a

39
00:01:17.790 --> 00:01:18.900
very good not to put in your

40
00:01:18.900 --> 00:01:19.530
toolbox

41
00:01:40.800 --> 00:01:44.490
hmm

42
00:01:55.440 --> 00:01:56.370
patio